main-logo

Saudi local shop specialized in FPV drone building parts.

FETtec FC G4

83.43 USD
  • Latest STM32G4 Processor
  • 170Mhz + Math accelerator

  • MPU6000
  • Supply voltage 6-27V (2S-6S Lipo)

  • 2x dedicated onboard BEC (max. 600mA each)
  • 5V BEC for RX

  • 5V/16V BEC for VTX (switchable and real Pit*)
  • 2x 8 pin connector for solder free ESC connection
  • Connector 1: ESC signal 1-4, telemetry, VCC, GND

  • Connector 2: ESC signal 5-8 (depending on UAV type 1-4), telemetry, VCC, GND
  • 1x 8 pin connector for solder free VTX, cam connection and OSD or digital systems
  • real Pit* VCC, GND, Video in, Video out, BEC 5V/16V, VCS/TX3, RX3
  • 2x 6 pin connectors for serials
  • RX1, TX1, 3.3V, VCC, 5V, GND

  • RX3, VCS/TX3, RGB LED, VCC, 5V, GND
  • 1x 4 pin connector for receiver
  • Signal, TLM, 5V, GND
  • 5 UART serials
  • UART 1 free

  • UART 2 used for Receiver

  • UART 3 free

  • UART 4 used for onboard OSD, can be set free

  • UART 5 used for ESCs / TLM / Onewire
  • 4 ESC solder pads (Signal/GND) in each corner

  • Buzzer pads

  • 4 tiny RGB LEDs (selectable color)

  • Supported ESC protocols
  • PWM, Oneshot125, Oneshot42, Dshot150/300/600/1200/2400, FETtec Onewire
  • FETtec KISS firmware

  • Onboard OSD
  • Graphic OSD (STM32)

  • Full KISS Tuning
  • Filter (PIDs, Rates, Settings)
  • LED control (RGB LED, Racewire)
  • VTX
  • Live data graphs (Voltage, motor rpm, current, motor temp, gyro values, link quality)
  • KISS GPS support + live map
  • Custom graphic pilot logo
  • Stick overlay
  • Custom layout
  • can be deactivated for usage of digital systems
  • Connector type: JST-SH-1mm

 

*real Pit-Mode: A power supply pin which is remotely switchable

 

Dimensions:

dimensionsO2BNL0T723GCJ

  • Maximum outside dimensions: 37,2 x 37,2mm, without outside tips 30 x 30mm

  • Mounting hole arrangement:
  • 20 x 20mm with M2 mounting hole (expandable to M3)

  • 30 x 30mm with M3 mounting hole

  • 30 x 30mm mounting hole tips are removable to reduce overall FC size
  • Overall height: 7,9mm

  • Weight: 5,37g

 

Firmware:

  • KISS Firmware
  • FETtec OSD Firmware


83.43 USD
Products you may like